The primary windings of two coupled inductors are connected in parallel
to share the input current and reduce the current ripple at the input. On the
other hand,the proposed converter inherits the merits of interleaved
series-connected output capacitors for high voltage gain, low output voltage
ripple, and low switch voltage stress. Moreover, the secondary sides of two
coupled inductors are connected in series to a regenerative capacitor by a
diode for extending the voltage gain and balancing the primary-parallel
currents. In addition, the active switches are turned on at zero current and
the reverse recovery problem of diodes is alleviated by reasonable leakage
inductances of the coupled inductors. Besides, the energy of leakage
inductances can be recycled
DC/DC CONVERTER
DC-DC
Converters:
There are three basic types of dc-dc
converter circuits, termed as buck, boost and buck-boost. In all of these
circuits, a power device is used as a switch. This device earlier used was a
thyristor, which is turned on by a pulse fed at its gate. In all these
circuits, the thyristor is connected in series with load to a dc supply, or a
positive (forward) voltage is applied between anode and cathode terminals.
For more details: Click here......
No comments:
Post a Comment